-
AMP® ONE Design-Master Remote Control™
IR remote control for all AMP® ONE fixtures, preset levels, or fine-tune in 2% increments.
Learn More -
The Hammer™ 10" Large Groove Ground Stake
A Landscape Lighting Innovation, Designed & Engineered Exclusively by AMP®
Stakes are normally small (so that installers are able to push them into the ground), but as a result fixtures tilt and tip due to improper anchoring - especially in frost-prone climates. With The Hammer® Stake, we were able to make the stakes the proper size - LARGE! It's not just faster and easier, but bigger and more secure! Now with a large groove to allow for larger cable gauge or multiple wires!1 Year Warranty
Learn More -
The Hammer™ 10" Large Groove Ground Stake with Solid Brass Threading
A Landscape Lighting Innovation, Designed & Engineered Exclusively by AMP®
Landscape lighting fixture stakes are typically small so that installers may more easily push them into the ground; but with those small stakes, fixtures can tilt due to insufficient anchoring. With this new Hammer® Stake, we provide an an extra long (10") and extra wide (3") stake that presents a much larger surface area to the soil for a significantly better and longer lasting anchor for the fixture. The brass insert is an additional improvement. It provides corrosion-resistant and wear-resistant threads. The brass threads in the stake mate perfectly with the brass fixture threads for the ultimate fixture support. Now with a large groove to allow for larger cable gauge or multiple wires!1 Year Warranty
Learn More -
NewHammer® 13" PVC Ground Stake (with Brass Insert)
A Landscape Lighting Innovation, Designed & Engineered Exclusively by AMP®
Stakes are normally small (so that installers are able to push them into the ground), but as a result fixtures tilt and tip due to improper anchoring - especially in frost-prone climates. With the 13" stake, we were able to make the Hammer® stakes larger and more secure! Brass inserts provide wear-resistant threads.1-Year Warranty
Learn More -
Solid Brass Ground Stake
No compromises ... when only the best will do.
The most durable stake in the industry. Solid cast brass 9 3/4" T x 2" W stake with 1/2' NPSM. Nothing beats the solid heavyweight feel of a brass stake. Threads are more secure than PVC threads, which can mis-thread and strip (especially if fixture is hit/bumped). Top pros who do top projects often prefer the durability of brass stakes.
Lifetime Warranty
Learn More -
Solid Brass Surface Mount
Solid brass surface mount for attaching light fixture to hard surfaces. Made from the same brass as our fixtures. Also available in copper finish.
Lifetime Warranty
Learn More -
AMP® Solid Copper Surface Mount
Solid brass surface mount for attaching light fixture to hard surfaces. Made from the same copper as our fixtures. Also available in brass finish.
Lifetime Warranty
Learn More -
Trident 8" Ground Stake
The Trident 8" Ground Stake has a solid cast brass top with 8" stainless steel rods. Great for top designers and landscape architects. Go-to stake style for many top design professionals. Brass top and threads means stake will never strip. Wide 4" top and base means extra stability. Stainless rods are like a spear gun -- easy to penetrate the soil. Especially useful in rocky and root-filled ground installations.
Lifetime Warranty
Learn More -
AMP® Solid Brass Multi-Mount
A Landscape Lighting Innovation, Designed & Engineered Exclusively by AMP®
One Mount. Two Fixtures.
Our solid cast brass Multi-Mount can be used as a surface mount or ground stake. For ground mounting, the unit includes four stainless steel spikes that screw into the underside of the mount. For mounting on any hard surface, the mounting holes accommodate wood or masonry screws (not included).
Lifetime Warranty
Learn More -
AMP® Lanai Mount Brass
AMP® Lanai Mount features a slim profile (1.5" x 3" base) ideal for mounting AMP® spotlights on narrow surfaces such as lanai frames and narrow posts and railings. Hardware included.
Lifetime Warranty
Learn More -
AMP® Gutter Mount Brass
Introducing our versatile AMP® Gutter Mount Kit for down-lighting or up-lighting
A Landscape Lighting Innovation, Designed & Engineered Exclusively by AMP®
Versatile AMP® Gutter Mount Kit for landscape lighting applications. Ideal for lighting eaves, upper floors, and roof lines. Easy to install and includes brass couplers to accept a wide range of low voltage fixtures.Lifetime Warranty
Learn More -
AMP® Tree Strap Mounting Kit Brass
Ratcheting strap mounting kit for fast and secure fixture mounting in trees
Kit includes two nylon ratcheting straps and a sturdy brass mounting plate. Will accommodate any brass AMP® spotlight with a threaded knuckle.
Straps allow installers to attach fixtures to trees without the use of screws that may damage the tree.
Lifetime Warranty on Mount
Learn More
1 Year Warranty on Straps -
AMP® Flexible Tripod Mount Brass Bronze
Flexible mounting for downlight fixtures in trees or on uneven surfaces - easy installation, lasts a lifetime
1/2" threading will accommodate any brass AMP® spotlight with a threaded knuckle. Flexible tripod structure allows for two solid contact points on any surface and is offset from the tree (or other surfaces) to prevent tree overgrowth, protecting the surface and fixture.
Lifetime Warranty
Learn More -
NewAMP® Large Aluminum Surface Mount (Black)
Large aluminum surface mount - designed for use with AMP®'s more robust aluminum fixtures. Allows you to affix your fixture on a flat surface (wood, concrete, etc.). 5-Year Warranty.
Learn More -
AMP® 3" Hardscape Mounting Plate - Stainless Steel
Stainless steel mounting plate for 3" AMP® Hardscape Lights. Features two stainless steel Phillips screws for attaching to fixture. This bracket is used to slip under capstones, stair treads and other features. Lifetime warranty.
Learn More -
AMP® 6" Hardscape Mounting Plate - Stainless Steel
Stainless steel mounting plate for 6" AMP® Hardscape Lights. Features two stainless steel Phillips screws for attaching to fixture. This bracket is used to slip under capstones, stair treads and other features. Lifetime warranty.
Learn More -
AMP® 12" Hardscape Mounting Plate - Stainless Steel
Stainless steel mounting plate for 12" AMP® Hardscape Lights. Features two stainless steel Phillips screws for attaching to fixture. This bracket is used to slip under capstones, stair treads and other features. Lifetime warranty.
Learn More -
AMP® 18" Hardscape Mounting Plate - Stainless Steel
Stainless steel mounting plate for 18" AMP® Hardscape Lights. Features two stainless steel Phillips screws for attaching to fixture. This bracket is used to slip under capstones, stair treads and other features. Lifetime warranty.
Learn More -
AMP® Solid Brass Extension Riser (6in, 12in, 24in)
Brass bronze extension risers are used to raise mounting height of outdoor lighting fixtures above plant material. Also great for increasing stem height of path and area lights to increase illumination area. Match seamlessly with our brass outdoor lighting path and area lights (same material, finish and thickness) 1" Diameter brass pipe with 1/2" NPSM male and female threading.
Available in three different lengths!
6" ($9.97) 12" ($12.97) or 24" ($15.97)Lifetime Warranty
Learn More -
AMP® Solid Copper Extension Riser
Copper extension risers are used to raise mounting height of outdoor lighting fixtures above plant material. Also great for increasing stem height of path and area lights to increase illumination area. Match seamlessly with our copper outdoor lighting path and area lights (same material, finish and thickness) 1" Diameter copper with 1/2" NPSM male and female threading.
Available in three different lengths!
6" ($9.97) 12" ($12.97) or 24" ($15.97)Lifetime Warranty
Learn More -
AMP® Black Brass Extension Riser
Black powder coated brass extension risers are used to raise mounting height of outdoor lighting fixtures above plant material. Also great for increasing stem height of path and area lights to increase illumination area. Match seamlessly with our brass black outdoor lighting path and area lights (same material, finish and thickness) 1" Diameter brass pipe with 1/2" NPSM male and female threading.
Available in three different lengths!
6" ($9.97) 12" ($12.97) or 24" ($15.97)Lifetime Warranty
Learn More -
6"- 12" Brass Telescoping Extension Riser
Telescoping extensions are great for adding adjustable height to anyone of our fixtures. Our Telescoping solid brass extension poles are used to raise mounting height of outdoor lighting fixtures above plant material or any other obstacles.
Learn More -
12"- 24" Brass Telescoping Extension Riser
Telescoping extensions are great for adding adjustable height to anyone of our fixtures. Our Telescoping solid brass extension poles are used to raise mounting height of outdoor lighting fixtures above plant material or any other obstacles.
Learn More -
18"- 36" Brass Telescoping Extension Riser
Telescoping extensions are great for adding adjustable height to anyone of our fixtures. Our Telescoping solid brass extension poles are used to raise mounting height of outdoor lighting fixtures above plant material or any other obstacles.
Learn More