Free ground shipping on all orders in the continental U.S.

(813) 978-3900

Accessories

Items 1-24 of 77

Set Descending Direction
  1. VAC-MOTION1-BBZ_005_JPG_1.jpg
    AMP® 12V InlinePro Motion Sensor

    This groundbreaking inline motion-sensor allows you to simply expand home security by converting a low-voltage landscape lighting system to a motion-detecting security system.

    Learn More
  2. VAC-AL-GG20-BBZ.jpg
    Solid Cast Brass Extended Glare Guard (2 inch)

    Solid cast brass extended glare guard for the AMP® ONE ControlPro 300 Spotlight. Designed to provide extra measure of glare control without reducing beam angle.

    Learn More
  3. Solid Cast Brass Extended Glare Guard (3 inch)
    Solid Cast Brass Extended Glare Guard (3 inch)

    Solid cast brass extended glare guard for the AMP® ONE ControlPro 500 & 800 Spotlights. Designed to provide extra measure of glare control without reducing beam angle.

    Learn More
  4. a5.png
    AMP® Lens & Filter Binder

    The absolute best way to store and transport your lenses and filters. Without this binder, your valuable glass lenses and dichroic filters may be lost or damaged - especially when packed in boxes that contain other products.

    Learn More
  5. AAC-REMOTE2_001 copy.jpg
    AMP® ONE Design-Master Remote Control™

    IR remote control for all AMP® ONE fixtures, preset levels, or fine-tune in 2% increments. One remote controls all fixtures. Powered by 2 AAA batteries (included). Lifetime warranty.

    Learn More
  6. AMP® Timer & Photocell Combo for Slim Line Transformers
    AMP® Timer & Photocell Combo for Slim Line Transformers

    Designed for ease of operation, the timer/photocell combo features a simple dial with extra-large labels - no programming required. The user simply plugs in the timer and photocell then turns the dial to the desired setting. Available settings include Dusk-to-Dawn, time durations after dusk, On, and Off. For use with our Slim Line Transformer series only.

    Learn More
  7. Dichroic Color Temperature Adjustment Lens (2 inch)
    Dichroic Color Temperature Adjustment Lens (2 inch)

    These Dichroic Color Correction lenses convert the initial 2700K light to 2000K, 3000K, 3300K, or 3700K. U.S. made from high quality glass, will not fade or change color, and absorb less light than colored lenses.

    Learn More
  8. Dichroic Color Temperature Adjustment Lens (3 inch)
    Dichroic Color Temperature Adjustment Lens (3 inch)

    These Dichroic Color Correction lenses convert the initial 2700K light to 2000K, 3000K, 3300K, or 3700K. U.S. made from high quality glass, will not fade or change color, and absorb less light than colored lenses.

    Learn More
  9. colored filters.jpg
    Colored Dichroic Lens Filters (2 inch)

    The high quality, non-fading, 2” Dichroic Lens fits into select AMP® fixtures to change the color of your beam spread. These lens are used when an effect is needed for a holiday or other special effect application. Choose your favorite color today!

    Learn More
  10. colored filters.jpg
    Colored Dichroic Lens Filters (3 inch)

    The high quality, non-fading, 3” Dichroic Lens fits into select AMP® fixtures to change the color of your beam spread. These lens are used when an effect is needed for a holiday or other special effect application. Choose your favorite color today!

    Learn More
  11. mr16-diffusion.jpg
    MR16 Diffusion Lens

    MR16 lens fits onto most MR16 fixtures on top of the lamp to diffuse light. Great for getting more spread out of your spotlight/flood light. Deep cuts in the lens and thick glass add to the quality and effect.

    Learn More
  12. mr16-frosted.jpg
    MR16 Frosted Lens

    Our most popular lens option! Softens light output, diffuses the edges of the light and eliminates hot spots. Slightly reduces light output. Designed for all of our MR16 fixtures. Simply insert inside the lens assembly, on top of the lamp.

    Learn More
  13. hex.png
    MR16 Hex Louvre Lens

    Softens light output, diffuses the edges of the light & eliminates hot spots! Slightly reduces light output. Designed for all of our MR16 fixtures. Simply insert inside the lens assembly, on top of the Lamp.

    Learn More
  14. VAC-TS-KIT-10PK.png
    Tree Wire Management Kit

    With 10 stainless steel screws, nylon spacers and zip ties, this kit enables you to prevent your cable from being harmed by tree overgrowth while also protecting the tree itself from being damaged. The UV resistant black zip ties provide a sleek; hidden look and also offer an eyelet for tree mounting. Lifetime Warranty.

    Learn More
  15. AMP® Replacement Wicks for PolynesianPro Torch Light (2 Pack)
    AMP® Replacement Wicks for PolynesianPro Torch Light (2 Pack)

    Top-quality, round fiberglass replacement wick for our AMP® PolynesianPro Torch Light. Extra long-lasting and easy to replace. Keep your flame shining bright, by replacing your wicks.

    Learn More
  16. AMP® solid cast brass trim ring for well lights.
    Solid Cast Brass Trim Ring

    Our solid cast brass trim ring fits all of our InsetPro™ fixtures, providing a smooth antique bronze outer ring that will give your fixture a professional look. The solid cast brass construction ensures the same build quality and durability as the rest of our AMP® line.

    Learn More
  17. AMP® Mechanical Timer for Slim Line Transformers
    AMP® Mechanical Timer for Slim Line Transformers

    This timer is an essential energy-saving timer for your low voltage landscape lighting system. This unit plugs directly our AMP® Slim Line Transformers and gives you ease of light system control. Automatically turns your low voltage lighting system ON and OFF.

    Learn More
  18. surfacem1.png
    Solid Brass Surface Mount

    Solid brass surface mount for attaching light fixture to hard surfaces. Made from the same brass as our fixtures. Also available in copper finish. Lifetime Warranty.

    Learn More
  19. dm4_1.png
    AMP® Solid Brass Multi-Mount

    One Mount. Two Fixtures. Our solid cast brass Multi-Mount can be used as a surface mount or ground stake. For ground mounting, the unit includes four stainless steel spikes that screw into the underside of the mount. For mounting on any hard surface, the mounting holes accommodate wood or masonry screws (not included). Lifetime Warranty.

    Learn More
  20. bbz.png
    AMP® Lanai Mount Brass

    Features a slim profile (1.5" x 3" base) ideal for mounting AMP® spotlights on narrow surfaces such as lanai frames and narrow posts and railings. Hardware included. Lifetime Warranty.

    Learn More
  21. VAC-SM8-BBZ_001.jpg
    AMP® Flexible Tripod Mount Brass Bronze

    1/2" threading will accommodate any brass AMP® spotlight with a threaded knuckle. Flexible tripod structure allows for two solid contact points on any surface and is offset from the tree (or other surfaces) to prevent tree overgrowth, protecting the surface and fixture.

    Learn More

Items 1-24 of 77

Page
per page
Set Descending Direction
Created with Sketch. Created with Sketch. Created with Sketch. Created with Sketch.