January 30, 2026
Discover Fixtures and Devices Automatically
Next, we’ll add fixtures and devices. The good news: compatible devices are automatically discovered during setup. To add your devices:
- Tap the plus icon in the top right corner
- Tap add advice
- You'll see discovered devices appear with a pulsing ring on your phone
Out in the yard, fixtures in pairing mode will be flashing white. Tap the device icon on your phone to add it, and look for the green check mark confirming success.
Pro Tip (Pairing Mode Reset):
If your fixtures aren’t flashing in the yard, turn the transformer on and off five times to put wired devices back into pairing mode. The lights should begin flashing white again. After you add a device, the app will take you straight into its setup screen. You can choose a color and set brightness from 0 to 100%.
Pro tip, you’ll likely fine-tune color and brightness later when you build Zones, Scenes, or Groups.
For more learning information, check out: https://www.amplighting.com/learning-center/category/amp-iq
