AMP® PAR36 Well Light (Lamp-Ready)

AMP® PAR36 Well Light (Lamp-Ready)

The PAR36 Well Light is great for installing in turf or mulch beds for an assortment of uplighting applications. A perfect substitution for a spotlight where an in-ground fixture is desired. Low profile design keeps the fixture hidden but results in highly effective lighting. Truly the most affordable high-intensity lighting fixture on the market. Uses a halogen or LED PAR36 lamp up to 35W.

Features:

• Lamp-ready with a wide array of AMP® lamps to choose from.
• Reversible PVC tube - Angled or flat glare guard on top.
• Optional Debris Cover for bulb protection (only for use with 20W and 35W lamps).
• Hassle-free Lifetime Warranty (for both residential and commercial projects)
• UL & cUL® Listed

NOTE:

1. Open design well lights (and well lights in general) should not be installed in locations where they can become filled or covered by leaves, pine needles or debris. They should be installed in regularly maintained areas to ensure they are free and clear of debris. Failure to do so can result in dangerous overheating, premature lamp or fixture failure and even risk the possibility of a fire.
2. Do not use a debris cover with any halogen lamps over 35 watts or it can cause dangerous overheating. Halogen wattage's above 35 watts in this fixture requires the fixture to be open and well maintained to dissipate the heat. With LED PAR36 heat is no longer an issue.
3. In a professional design, it is rare to need more than 35 watts of illumination 50 watts and above leads to hot spots from a design perspective and overheating for fixtures. If you need more light than 35 watts, you likely need more fixtures, not more wattage. However, with our LED PAR36 you can now get much more light from a single fixture at a fraction of the cost.